Hydrogen Cell Videos

Posted by Jonas | July 9, 2008 .

1. Hydrogen FX Cells running 2HP engine on HHO 5.5 liters

HHO torch experiments melting metal, Hydrogen FX is a professionally built 316 stainless steal hydrogen electrolyzer for use as a fuel saving device or small HHO torch. All internal parts are built form computer stamped 16 gauge 316 stainless steal guaranteed to last. the outer case is ABS plastic caplable to withstand very high temperatures. This unit produces a true 2 liters of HHO per minute and only uses distilled white vinegar for electrolyte. No harsh chemicals. This HHO cell will pull up to 30 amps at 12vdc. Unlike other HHO generators for sale, HydrogenFX shows you the actual Liter per min flow in our videos with a calibrated Flow meter.
In our experiments we have powered a 2 horse power Brigs and Stratton engine using 4 of our HHO generators in series producing over 6 liters of HHO LPM . You can see these in our videos before you buy. You can also see photos of the internal 316 stainless steal plates that Hydrogen FX uses. We have nothing to hide. This technology is not new, What you are paying for here is craftsmanship and efficiency.

2. Hydrogen Cell HHO Dual 4 Wall Plate – Home Depot (Car Trial)

7th Documented Video Test of a *NEW* DUAL 4 Plate HHO Cell w/ Tap Water and Baking Soda as Electrolyte (1/2 teaspoon).

HHO-Cell Test: 1 Liter per Minute Output

This is just a TRIAL RUN @ idle:
Nissan Altima (1998)
2.4Liter Engine – 4 Cylinder.
MPG: (Stock) 28-city/36-highway

Heat is a HUGE consideration when dealing with these type of hho-cells. First off, you will get a type of run-away effect once you get temperature spike of upwards 140°-180°F. Once this occurs your run-away results in HUGE Amperage increase on the hho-cell.

This is something to consider because it is under your hood of your car with an engine specifically set-up to run @ 220°F or more if stuck in traffic. Ideas for cooling must be thought about, especially with a small cell like ours that you see here.

Plus the winter is near, so I believe the placement near the exhaust header is perfect. Also, another bump in the road is the fact of freezing temperatures in our cell when not in use during the cold months. Possibly Alcohol additive for a type of Anti-freeze???

Anyone with any ideas please be sure to share them with us.

Other modifications prior to this video included: newer design upgraded to weatherproof enclosure, modified with a plexiglass (quarter inch think) viewing window for study.

Further upgraded to the cell Stinger 4-gauge wire with the addition of 8-gauge audio power cables also. With electrician grade heavy duty crimp down connectors, similar to stay-cons.

The actual plates are 98% of the components being stainless steel (non magnetic) screws/bolts to further our experiments. Spacing is around 1/16th of an Inch. This set-up is regarding a dual 4 wall plate config, store bought from Home Depot.

Baking Soda is our electrolyte. The plates are configured to be 2+(pos) and 2-(neg) .. or can be switched around.