Instead of gasoline, your car will be running on what is scientifically known as HHO and this fuel is far more efficient than the gasoline it is running on now. If you so want, you can have the kit installed by an efficient engineer. However, if you want to save money, you can install the HHO kit all by yourself. These kits are not very costly and come for around $50-100 along with illustrated manuals. Start saving money that you are wasting on fuel by installing a hydrogen car fuel kit and do not forget that it will not just run on tap water and that you will have to take HHO fuel for it.

Two hundred and eight years and counting

Let’s get some facts out on the kitchen table first. Hydrogen is a very powerful, clean burning fuel. It also want of the most abundant elements on Earth since water is made up of two parts hydrogen and one part oxygen and covers two thirds of the globe. Basic science, right?

So how do you get hydrogen and oxygen from water? When you pass an electrical current though a couple of electrodes in water, it divides the hydrogen and oxygen into atoms and forms a gas. This process is called “water electrolysis and was discovered in 1800.

In the 1970s a Dr. Yul Brown designed and sold various welding machines utilizing what he called “Brown’s Gas” or a HHO mixture (Hydrogen-Hydrogen-Oxygen) that was produced from a water electrolysis process. It is his design that today has inspired the latest generation of water to gas inventors.

How does a “water for gas” system work in you car? The current from your car battery is used to break up water into a HHO or “hydroxyl” gas inside an “electrolyzer”. The gas created from it is then routed to your car’s air intake and drawn into the engine. This in turn will give you more power and increases your gas mileage and savings.

The Components of Water for Gas System

The electrical power source – this is your vehicle’s battery. In order to run a water for gas hydrogen enhancement system, you must use a good strong battery. The battery and the car’s alternator (which recharges) the battery must be in good condition.

A Safety or Breaker Switch – Depending on the design of a Brown’s Gas generator it should have a some kind of breaker or failsafe switch which powers off the system when the engine stops running. Some systems are tied to oil pressure sending unit which monitors the pressure within the vehicle. If the car is stopped, it has no oil pressure; so a breaker switch that is attached to the pressure gauge would be ideal.

The Electrolyzer – this is the real meat and potatoes of the water for gas system. It should be powered by water (tap or distilled) and usually an electrolyte made from various additives. Some electrolyzers are powered by other solutions such as Potassium Hydroxide or Potash, an extremely caustic chemical.

The Bubbler – whether it is designed as part of the electrolyzer or is in a separate unit, your water for gas system should have way to reduce flashback explosions in the rare event the car backfires and sends a flame back down the intake to hydrogen electrolyzer.

The Electronic Sensor – in many modern fuel cars, they have an electronic sensor or two which monitors the air to gasoline fuel mixture. Depending on the how much HHO gas is being added to your car’s system, you may have to adjust this filter to properly compensate.

If you are serious about saving money and adding extra miles to that gallon of gas you burn, you should consider getting a water for gas kit.

Okay, with gas at an all time high, you admit you are curious…so what is this water for gas stuff all about?

First let’s get some of the confusion out of the way. Since the 1870’s when American inventor and self-proclaimed “humbug” John Worrell Keely persuaded investors with his experiments in “ether liberation”, the concept of creating fuel from water or hydrogen fuel generation has always been a controversial one.

The History of Hydrogen Generation

Using electrical current to create hydrogen from water is really old news. It was back in 1800 that two Englishmen, William Nicholson, a chemist and naturalist, and his friend Anthony Carlisle, a surgeon discovered that they could use “water electrolysis” to separate H2O into oxygen and hydrogen.

A great discovery but nothing much happened after that since the process took a great deal of physical energy, usually by means of some guy rapidly turning a hand-powered crank generator to create an electrical current. Oddly enough the first working battery was also invented that year.

Hydrogen generation didn’t get its feet off the ground, no pun intended, until the 1900’s when the heyday of the dirigibles or airships started. At that time German Count Ferdinand von Zeppelin designed a fleet of ocean crossing ridge airships that used massive amounts of hydrogen in gas cells or bags for buoyancy. Zeppelin is believed to have used water electrolysis to create this lighter-than-air gas for his many airships.

After 1937, when the tragic accident with the hydrogen airship Hindenburg happened, using water electrolysis became limited to just industrial uses in manufacturing and aerospace or in school science fairs as classroom lab experiments.

But in 1966, an American inventor named William Rhodes patented a type of “water for gas” “oxyhydrogen” welding system for manufacturing and the jewelry business. His self-contained unit was the first to make “water electrolysis” compact and portable and “on-demand”. Hydrogen didn’t have to be stored in heavy metal bottles.

Later in Australia, a Dr. Yul Brown patented his own version of the “water electrolysis” welder. Brown has been accused of “borrowing” heavily from Rhodes’s 1966 patent, but “Brown’s Gas” machine is believed to have a simpler design than Rhodes. Brown sold his version of this process worldwide to other inventors, small shops and home owners.

While apparently Brown may have had limited financial success with his welding machine; it is his technology that is has become popular as the basis for most water for gas or fuel from water kits available on the market today.

So there is some real science behind the water for gas movement and in the fact that compact hydrogen generators do work and have been used in various industries for years.

You probably have heard about water cars or running your car off water and thought “SCAM!” Well, let you in on some real facts about water for gas based alternative fuels.

Q: Does water for gas really work ?
Yes! The latest “craze” is based on a proven technological process that has been used for over 200 years. “Water electrolysis” is the method in which an electrical current is passed through some electrodes that are submerged in water and this causes the water to “split up” into its basic components (hydrogen and oxygen).

Q: So why hasn’t this been done before?
Well, the “water electrolysis” process has been used for years in heavy industry and aerospace. But it wasn’t until the 1960s and 70s that two men (William Rhodes and Yul Brown) made breakthroughs in using the process effectively in small compact machines and devices.

Both of these gentlemen patented welding devices using hydroxyl gas created from using a water electrolysis system. Dr. Brown’s designs and devices are the bedrock for most of the water for gas kits and plans available today.

It’s Brown’s Gas or HHO gas (hydrogen and oxygen gases split from water) that is injected to a car’s air intake system to help improve engine efficiency and lower gasoline consumption. And save you hundreds of dollars overall.

Q: Is Water for Gas it safe?
Yes, technically no hydrogen is stored in the vehicle you have a limited risk of danger. But since HHO gas is being generated on demand your kit or plans should have safeguards in case of backfire and to shutdown the generator when the car is stopped or at idle.

Q: Can I install a water for gas kit myself?
Yes, most kits are designed for the do-it-yourself shade tree mechanic or home user with just a few simple tools. Most plans use materials and items that you can pick up affordable from most hardware or garden stores.

Q: Okay, how expensive is a water for gas kit?
That depends on the construction and design of the kit itself and how clear the instructions are for installation. Some kits are really very professionally designed and constructed and may require some outside expert help (your mechanic). Other kits can have your car retrofitted in a weekend doing it yourself. Then there are the plans for kits that buy the materials. So the costs can vary but most kits range from $150 -$499.

Now that you know a little more about water for gas kits and their costs

What is does Water for Gas mean?

Water for gas is very modern term describing a process that is very old. Water for gas is in part a process of water electrolysis. Invented by Englishmen, William Nicholson and Anthony Carlisle about 1800, water electrolysis has been used to separate plain H2O into its component parts (hydrogen and oxygen) for a over a two hundred years.

Basically you install a prebuilt kit or make one yourself that using your car’s electrical system to separate the hydrogen and oxygen into what is called HHO or Brown’s Gas. This gas is then mixed in with the normal air flow of your vehicle and compressed with gasoline. The ignited gas combusts at lower temperatures which allows the car to burn less gas and save you money by increasing the mileage.

Who invented the Water for Gas System?

Since this process has been around longer than the internal combustion engine, it is safe to say that a whole lot of folks may have had a hand in developing the prcess. But two the pioneers were William Rhodes, an American inventor, who in the 1960s was the first to patent the water electrolysis process into a compact, portable electrolyzer (which he used as an oxy-hydrogen welder).

But the man who gets the most credit is a Dr. Yul Brown from Australia. He also patented a oxy-hydrogen welder but being the better marketer of the two inventors, his design became popular with mechanics and hobbyists worldwide.

And it’s the “Brown’s Gas” or HHO generator that forms the core concept in most the water for gas or fuel from water car kits and designs available on the market today. Brown’s Gas is by volume two parts hydrogen and one part oxygen. This is different from the normal H2 gas available from gas bottlers.

How does it Work?

In a normal 4-stroke engine you have 4 phases (intake, compression, power and exhaust). Air is pulled into the car’s combustion chamber along with a preset spray of gasoline. Together they are compressed, and then ignited with an electrical spark in the power phase, The whole mixture combusts (in a controlled explosion) which powers the car. The carbon byproducts are then released from the chamber during the exhaust cycle.

With the water for gas system, the HHO gas is introduced into the combustion process, mixed in with air. The new gas (air + HHO) is compressed with the gasoline, but since HHO has a lower flashpoint it allows the combustion process to use less gas and this in time saves you money.

Is This Process Safe?
As mentioned before water electrolysis has been in use for over 200 years and is frequently used in tabletop demonstrations in classrooms and science labs around the world. If used properly, a water for gas system should be safe, clean and fuel efficient.

Gas prices are sky high and you have just about had enough. But what can you do? You have looked at all the other “gas savers” and the water for gas system seems likes something what you would be interested in but what are real benefits of using this system?

The first benefit is that with any hydrogen fuel injection system, the cost per mile will drop dramatically. If you get a good kit and install it properly, the science makes it impossible for you not to have an increase in gas mileage!

Okay, all water for gas kits generate a HHO or “hydroxyl” gas (2 parts hydrogen and 1 part oxygen) from water. The HHO gas is then pulled into the air intake on your engine where it lets the engine burn less gas and run cooler. So you see, the less gas you use; the more money you save!

The next benefit is that a HHO fuel enhancement or water for gas system is very environmentally friendly. HHO is produced from plain water, the liquid of life and nothing can be cleaner. All leftover byproducts are turned into steam and released through your exhaust as water vapor. Nothing to harm the atmosphere or animals or people. A water for gas system may not save the world but it does it fair share.

Naturally, safety is a very important benefit of using a HHO system. With no hydrogen cells or stored hydrogen in the kit, the risk of an explosion because of an accident is virtually impossible, unlike that of a hybrid car.

Simple technology is good technology. I once had a teacher who told me that. You see the more complex a device becomes the greater the chance of it having some kind of glitch or issue over time. HHO systems are simple. The technology in water for gas systems use has been used for over 200 years and proven simple and effective.

Affordable is the key word for most water for gas systems. The kits costs range from $150-$499. And you will more then likely need a new strong battery. Now may seem like a lot but if a good kit extends your gas mileage by 20% to maybe even 50% then you will recover the cost in a matter of months! Besides have you priced the cost a new hybrid car lately?

No major structural change is another hidden benefit. A hybrid car, has a radically new design and since few mechanics have ever seen one let alone worked on one, the hybrid owner is locked into going to a dealership for a long time if not the life of the car.

But with a kit, you can pick up any old used, subcompact (preferably one that has a reputation of good MPG), retro fit it with a water for gas system and save a ton of money using it as a commuter car! And no expensive repair bills.

Possible tax benefits from the IRS. The IRS has a tax credit for people who qualify by using a “green car” that has been “repowered to use an alternative fuel by an aftermarket installer”. With the proper documentation and evidence you may be eligible for a credit.

“The maximum deduction you can claim for qualified clean-fuel vehicle property with respect to any motor vehicle is one of the following.
1. $50,000 for a truck or van with a gross vehicle weight rating over 26,000 pounds or for a bus with a seating capacity of at least 20 adults (excluding the driver).
2. $5,000 for a truck or van with a gross vehicle weight rating over 10,000 pounds but not more than 26,000 pounds.
3. $2,000 for a vehicle not included in (1) or (2).”

Now that you know some the benefits of installing a water for gas system in your vehicle, you can be prepared to make smart decisions when you purchase your kit.

These people are the ones that give HHO gas technology a bad name. It’s hard enough to convince people to put foreign devices under the hood of their car (which could actually void the repair warranty of newer cars). News about somebody whose car had gone ruckus after installing the HHO gas device doesn’t make the situation any better.

So to be perfectly sure, get these devices only from authorized agents, resellers, and distributors. Have them installed by certified mechanics too. However, these devices are very easy to setup. For as long as you know how to repair your car, an e-book about it should suffice. Just make sure that you get quality devices and strictly follow the instructions contained in the pages of the instructional book. Soon enough, your car will be running your car twice the distance than you used to with just a few liters of gasoline in its tank.

He invented some devices, some engine parts that would facilitate him developing a hybrid engine that will switch to water and gas as its fuel from the conventional fuel. This is because 20% of the gas is burnt inside the engine and the rest is wasted as pollution and will incur us the bill.

You need to have an advanced stage of chemical knowledge so as to understand how the water acts as fuel. By some safe chemical processes, the water molecule is fragmented to two hydrogen (H) ions and an oxygen (O) ion. This HHO help the engine to burn the fuel more effectively. This will result in improving the mileage and saving the money on gas.

It is assured that running your car on water is not a scam. Throughout the world, people from every country are using this method to improve the mileage up to 50% and even more. There are videos in the internet that will demonstrate you how to run your car on water and also the interviews of the several satisfied customers who saved enough money from it.

Let me tell you how to make the conversion kit in your house. The process is very much easy and most of the pieces will be found either in your house or can be purchased from your local store paying under US$ 100. Even you don’t have to possess advanced mechanical expertise to build the kit. It is possible with the guidance from the expert as to how to run your car on water kit. You will receive your money back if you are not satisfied with the result.